Sydney, NSW

What an EV charger installation costs in Sydney

Sydney home EV charger installation, coordinated by us and performed by licensed local NSW electricians. See your exact price up front, then let us manage the whole install — including strata approvals and your CCEW.

Local Sydney EV charger installers

We match Sydney homeowners with licensed local electricians who specialise in home EV charger installation. Every install includes the charger, cabling, breaker, isolator, testing and a Certificate of Compliance for Electrical Work (CCEW).

  • Licensed NSW electricians
  • Certificate of Compliance for Electrical Work (CCEW) included
  • Strata / apartment installs handled end-to-end
  • Tesla Wall Connector & universal Type 2 chargers
  • Solar-integrated and load-managed setups
  • Exact price on screen — install only from $800

Suburbs we service around Sydney

Not sure if you're in our service area? Enter your postcode on the home page and we'll confirm instantly.

Sydney CBDBondiBondi JunctionCoogeeRandwickPaddingtonNewtownSurry HillsBalmainRozelleManlyMosmanNeutral BayChatswoodNorth SydneyLane CoveRydeEppingParramattaBlacktownCastle HillBaulkham HillsPenrithLiverpoolBankstownHurstvilleCronullaSutherlandMirandaHornsby

What a Sydney home EV charger install typically costs

From $800

install only · your exact price on screen in 60 seconds

See your exact price

Your exact price, before you speak to anyone

From $800 — install only, charger supplied by you. Single-phase, single storey, parking within about 5m of your switchboard.

Most single-storey Sydney homes with the parking spot within 15m of the switchboard land between $800 and $1,200. Three-phase, a double-storey cable run or an open driveway add to that. If you'd like us to supply the charger, a standard 7kW smart unit adds $900.

See your exact price →

Your price includes a dedicated circuit, safety switch, wall-mounted installation, commissioning and workmanship warranty — performed by a licensed electrician to AS/NZS 3000, with the whole project managed for you.

What Ausgrid actually requires (and what you've probably read that's wrong)

If you've been reading up on this, you've likely seen a confident claim that NSW requires demand response or load management on any charger above 20 amps single-phase.

We went looking for that rule and couldn't find it. Ausgrid publishes no amp or kilowatt threshold for home EV chargers. What Ausgrid actually says is that "depending on the type and nature of the installation, you may be required to notify Ausgrid before installing so that we can assess the impact it may have on the grid," and that your licensed electrical contractor "can advise if a connection application is required to be submitted to Ausgrid for approval."

In other words: there's no universal number. It's a judgement your licensed electrician makes about your specific property. Where they identify that your supply needs upgrading to take the new load, a connection application goes to Ausgrid so they can assess it.

We mention this because it's the sort of thing that gets repeated until it sounds official. If an installer quotes you extra for mandatory load management on a standard 7kW single-phase charger, it's fair to ask them which published rule they're referring to.

Sydney is served by three distributors — Ausgrid, Endeavour Energy and Essential Energy — and which one covers you depends on your address. Your electrician deals with them.

Living in an apartment or a strata building?

This is the part that stops most Sydney EV owners, and it's more solvable than it looks.

Under the Strata Schemes Management Act 2015, EV charging infrastructure is treated as sustainability infrastructure — a category created specifically to make upgrades like this easier to get through an owners corporation than a standard major-works approval.

Before the owners corporation resolves on it, section 132B requires them to consider the cost (including running and maintenance costs), who will own, install and maintain the equipment, and how far its use will be available to other lots in the scheme.

The NSW Government publishes model motions and by-laws for the three common situations — works for a single lot, owners corporation installation and management, and managing an installation that already exists. Taking those to your strata manager is usually a faster path than starting from scratch.

We work with strata-experienced electricians who've been through this. Rules and voting requirements vary and do change — confirm the current position with your strata manager or the NSW Government resources linked below before you rely on it.

Your CCEW, handled

Every electrical installation in NSW needs a Certificate of Compliance for Electrical Work. Your licensed electrician issues it, and it's the document proving the work was tested and complies with the Gas and Electricity (Consumer Safety) Regulation 2018 and AS/NZS 3000.

One correction worth making, because a lot of pages still say otherwise: CCEWs now go to Building Commission NSW through its eCert portal — not NSW Fair Trading. Your electrician must submit it as soon as practical and no later than seven days after completing the electrical test, and copies flow to your distributor and to you.

You don't chase any of it. It's part of what we manage.

What we do, and what we don't

We're not the electrician, and we'll say so plainly. EV Charger Solutions is a project coordination and referral service. We're not a licensed electrical contractor and we don't do the installation ourselves.

What we do: hand-pick and vet the electricians who do. Licensed, insured, background-checked. We get you an exact price, match you with the right installer for your job, and manage the project from your first question to your CCEW landing in your inbox.

Sydney EV charger FAQs

How much does EV charger installation cost in Sydney?

With EV Charger Solutions, a Sydney install starts at $800 for a standard single-phase job — install only, charger supplied by you. Most single-storey homes with the parking spot within 15m of the switchboard land between $800 and $1,200. Three-phase, a double-storey run or an open driveway add to that; if you'd like us to supply the charger, a standard 7kW smart unit adds $900. You can see your exact price on screen before you speak to anyone. Across the wider Australian market, published figures put a typical installed 7kW charger at $1,400–$2,200 — see our cost guide for those sources. If your switchboard needs upgrading to take the new circuit, your installer confirms that cost with you before any work begins.

Does Ausgrid have to approve my home EV charger?

Not automatically, and there's no published amp threshold that triggers it — despite what a lot of sites claim. Ausgrid's position is that depending on the installation you may need to notify them first, and that your licensed electrical contractor advises whether a connection application is needed. Where your electrician identifies that your supply needs upgrading for the extra load, an application goes to Ausgrid to assess it. Your electrician handles that.

Can I install an EV charger in a Sydney apartment or strata building?

Usually yes. EV charging is treated as sustainability infrastructure under the Strata Schemes Management Act 2015, and section 132B sets out what the owners corporation has to consider — cost including running and maintenance, who owns and maintains the equipment, and availability to other lots. The NSW Government publishes model motions and by-laws covering single-lot works and owners-corporation installations, which is usually the fastest starting point. We work with strata-experienced electricians. Confirm current requirements with your strata manager.

Do I need a Certificate of Compliance for Electrical Work in NSW?

Yes. Every electrical installation in NSW needs a CCEW, issued by the licensed electrician who did the work. It's submitted to Building Commission NSW through the eCert portal no later than seven days after the electrical test, with copies to your distributor and to you. Every install we arrange includes it.

Who is my electricity distributor in Sydney?

Ausgrid, Endeavour Energy or Essential Energy, depending on your address — separate from your electricity retailer. Your electrician identifies yours and handles any notification or connection application your installation requires.

Sources

  • • Ausgrid — Electric Vehicle Charging (connection and notification requirements): ausgrid.com.au
  • • NSW Government — Electrical compliance requirements (CCEW, Building Commission NSW, timeframes): nsw.gov.au
  • • NSW Climate and Energy Action — Making your residential strata building EV ready: energy.nsw.gov.au
  • • Australian market price range: see our cost guide for full sourcing

Last verified: 29 July 2026

Ready to charge your EV at home?

Get your charger installed by a local electrician.

Estimate your install, then lock in your booking. We coordinate the rest.

PLAN MY INSTALL

Free estimate · 2 minutes · No obligation