Typical home EV charger install prices (indicative)
Every home is different, but the ranges below reflect publicly available 2026 Australian installer and industry pricing. Treat them as indicative only — your final price depends on the site and is confirmed by your licensed installer after assessment.
| Install type | Indicative installed price |
|---|---|
| Simple 7 kW single-phase (switchboard near parking spot) | $1,100 – $1,500 |
| Standard 7 kW single-phase (10–20 m run, new circuit) | $1,600 – $2,200 |
| Three-phase 11–22 kW (existing three-phase supply) | $1,900 – $3,500 |
| Tesla Wall Connector — typical installed total | $1,500 – $2,000 (complex jobs $2,500 – $3,000) |
| Switchboard upgrade (if needed) | + $1,200 – $2,500 |
| Single-phase to three-phase supply upgrade | + $3,000 – $8,000 |
Ranges include the charger unit, cabling, breaker, isolator, testing, and Certificate of Electrical Safety. GST inclusive. For reference: 7 kW smart charger unit alone is typically $700–$1,300, a Tesla Wall Connector unit is around $750–$800, and labour on a home install runs $500–$2,500 depending on complexity.
What drives the price up or down
- Distance from switchboard to charger — every extra metre of cable adds labour and materials.
- Single vs three-phase supply — three-phase enables faster 11kW/22kW charging but only helps if your car supports it.
- Switchboard condition — older boards often need an RCD upgrade or extra capacity.
- Cable path — surface-mounted conduit is cheapest; in-wall, under-slab or trenched runs cost more.
- Charger brand and features — smart chargers with app control, load management or solar integration cost more than basic units.
- Solar / battery integration — dynamic load balancing with existing solar adds hardware and setup time.
Single-phase vs three-phase: which do you need?
Most Australian homes are single-phase, which supports up to a 7kW charger — about 40km of range per hour. That's plenty for overnight charging on almost any EV.
Three-phase supports 11kW or 22kW chargers, but the extra speed only matters if your car accepts it. Tesla Model 3/Y takes 11kW; most other EVs cap at 7kW or 11kW on AC. Paying to upgrade to three-phase purely for faster home charging rarely makes financial sense.
Rebates and incentives in 2026
Rebates change frequently and vary by state and energy retailer. Some current programs offer discounts on smart chargers, credits for shifting to off-peak charging, or bonuses for enrolling in a virtual power plant. We check active offers in your postcode as part of the free assessment.
How to avoid paying too much
- Get at least two quotes from licensed local electricians.
- Ask for a fixed-price quote after a site assessment — not a phone estimate.
- Match the charger to your car and driving pattern; don't over-spec.
- Check whether your switchboard needs an upgrade before committing to a charger.
- Confirm the quote includes the Certificate of Electrical Safety.
Frequently asked questions
How much does it cost to install an EV charger at home in Australia?
Indicatively, most Australian homes pay between $1,400 and $2,200 all-up for a standard 7 kW single-phase home EV charger. Simple jobs where the switchboard is next to the parking spot can start closer to $1,100–$1,500. Three-phase installs, switchboard upgrades or long cable runs cost more. These are indicative ranges only; your assigned installer confirms a fixed quote after seeing the site.
What is the average cost of a 7kW home EV charger install?
The 7 kW single-phase charger is the most common home setup in Australia. A typical installed price sits around $1,400–$2,200, including the charger, cabling, breaker, isolator, testing and certificate of electrical safety. This is an indicative range only.
How much more does a three-phase 22kW charger cost?
If your home already has three-phase power, an 11–22 kW charger install typically comes in around $1,900–$3,500 (indicative). If you need to upgrade the supply from single-phase to three-phase, expect an additional $3,000–$8,000 depending on your network provider and the distance to the street.
Are there rebates for home EV chargers in Australia?
Rebates change often and depend on your state and energy retailer. As of 2026, some states and retailers offer incentives for smart chargers or off-peak charging plans. Availability and eligibility vary by state and are not guaranteed; we flag any current offers in your postcode during the free assessment.
Do I need to upgrade my switchboard?
Sometimes. Older switchboards without an RCD or with limited spare capacity may need an upgrade, indicatively $1,200–$2,500. Your licensed installer confirms whether this is required during the site assessment.
Sources
Price ranges in this guide are drawn from publicly available Australian installer and industry pricing guides, current as of July 2026:
Get a real price for your home
The only way to know what your install will cost is a free site assessment. We match you with a licensed local electrician who quotes based on your home, not a generic calculator.